|
We have tested samples of heat transfer material from a wide range of suppliers from various countries in order to provide the best quality products available. The criteria of our research has not made any concessions on price and we beleive that these products represent the best quality at any price!
This PVC material has a soft touch and, is particularly suited to small text and intricate designs, is very easy to weed and can be applied by a household iron (a heat transfer press is recommended).
PVC is less expensive than PU or FLOCK and although not as soft to the hand it is widely used it is not 'sticky' as many other inferior PVC products available.
- We guarantee 100% satisfaction that you will not buy better quality material than our product.
- Please advise of colour choice on completion of sale. If no choice is advised we will select the colours for you.
- Multiples of single colours chosen will be provided in one length. i.e 3m of Red and 2m of White will be supplied as one 3m length of Red and one 2m length of White.
A temperature range of 305° - 320° F and 8-12 second pressing time is given for this product. This material is more sensitive to time and temp than plain vinyl and you will need to test the exact settings with your equipment.
Don't worry. This is not rocket science. Just a few test pieces will nail the parameters of your press.
The medium pressure (about the same as for other heat transfers) and peeling the carrier off, cold (take the shirt off the press and wait at least 45 sec) is the same as for the PU and FLOCK materials.
Wash warm, using a mild detergent and dry in a household dryer. Caution: commercial dryers can get too hot!
Carefully iron garments inside out, when ironing over the design (no steam).
|